</a>開關電源" title="開關電源">開關電源" title="開關電源">開關電源評估板電路圖,材料清單.
The NCP1072/NCP1075 products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a PDIP−7 or SOT−223 package, the NCP1072/5 offer a high level of integration, including soft−start, frequency−jittering, short−circuit protection, skip−cycle, a maximum peak current set point, ramp compensation, and a Dynamic Self−Supply (eliminating the need for an auxiliary winding).
Unlike other monolithic solutions, the NCP1072/5 is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (65, 100 or 130 kHz). When the output power demand diminishes, the IC automatically enters frequency foldback mode and provides excellent efficiency at light loads. When the power demand reduces further, it enters into a skip mode to reduce the standby consumption down to a no load condition.
Protection features include: a timer to detect an overload or a short−circuit event, Overvoltage Protection with auto−recovery and AC input line voltage detection. For improved standby performance, the connection of an auxiliary winding stops the DSS operation and helps to reduce input power consumption below 50 mW at high line.
NCP1072/NCP1075主要特性:
• Built−in 700 V MOSFET with RDS(on) of 11
• Large Creepage Distance Between High−voltage Pins
• Current−Mode Fixed Frequency Operation – 65 / 100 /130 kHz (130 kHz on demand only)
• Peak Current: NCP1072 with 250 mA and NCP1075 with 450 mA
• Fixed Ramp Compensation
• Skip−Cycle Operation at Low Peak Currents Only: No Acoustic Noise!
• Dynamic Self−Supply: No Need for an Auxiliary Winding
• Internal 1 ms Soft−Start
• Auto−Recovery Output Short Circuit Protection with Timer−Based Detection
• Auto−Recovery Overvoltage Protection with Auxiliary Winding Operation
• Frequency Jittering for Better EMI Signature, Including Frequency Foldback Mode
• No Load Input Consumption < 50 mW
• Frequency Foldback to Improve Efficiency at Light Load
• Internal Temperature Shutdown
• These are Pb−Free Devices
NCP1072/NCP1075典型應用:
• Auxiliary / Standby Isolated Power Supplies White Goods / Smart Meter / E−Meter
圖1.NCP1072/NCP1075方框圖
圖2.NCP1075 12V/0.85A通用輸入電源電路圖
15W開關電源評估板NCP1075SOTGEVB
圖3.15W開關電源評估板NCP1075SOTGEVB外形圖
圖4.15W開關電源評估板NCP1075SOTGEVB電路圖
15W開關電源評估板NCP1075SOTGEVB材料清單(BOM):
詳情請見:
http://www.onsemi.cn/pub_link/Collateral/NCP1072-D.PDF
The NCP1072/NCP1075 products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a PDIP−7 or SOT−223 package, the NCP1072/5 offer a high level of integration, including soft−start, frequency−jittering, short−circuit protection, skip−cycle, a maximum peak current set point, ramp compensation, and a Dynamic Self−Supply (eliminating the need for an auxiliary winding).
Unlike other monolithic solutions, the NCP1072/5 is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (65, 100 or 130 kHz). When the output power demand diminishes, the IC automatically enters frequency foldback mode and provides excellent efficiency at light loads. When the power demand reduces further, it enters into a skip mode to reduce the standby consumption down to a no load condition.
Protection features include: a timer to detect an overload or a short−circuit event, Overvoltage Protection with auto−recovery and AC input line voltage detection. For improved standby performance, the connection of an auxiliary winding stops the DSS operation and helps to reduce input power consumption below 50 mW at high line.
NCP1072/NCP1075主要特性:
• Built−in 700 V MOSFET with RDS(on) of 11
• Large Creepage Distance Between High−voltage Pins
• Current−Mode Fixed Frequency Operation – 65 / 100 /130 kHz (130 kHz on demand only)
• Peak Current: NCP1072 with 250 mA and NCP1075 with 450 mA
• Fixed Ramp Compensation
• Skip−Cycle Operation at Low Peak Currents Only: No Acoustic Noise!
• Dynamic Self−Supply: No Need for an Auxiliary Winding
• Internal 1 ms Soft−Start
• Auto−Recovery Output Short Circuit Protection with Timer−Based Detection
• Auto−Recovery Overvoltage Protection with Auxiliary Winding Operation
• Frequency Jittering for Better EMI Signature, Including Frequency Foldback Mode
• No Load Input Consumption < 50 mW
• Frequency Foldback to Improve Efficiency at Light Load
• Internal Temperature Shutdown
• These are Pb−Free Devices
NCP1072/NCP1075典型應用:
• Auxiliary / Standby Isolated Power Supplies White Goods / Smart Meter / E−Meter
圖1.NCP1072/NCP1075方框圖
圖2.NCP1075 12V/0.85A通用輸入電源電路圖
15W開關電源評估板NCP1075SOTGEVB
圖3.15W開關電源評估板NCP1075SOTGEVB外形圖
圖4.15W開關電源評估板NCP1075SOTGEVB電路圖
15W開關電源評估板NCP1075SOTGEVB材料清單(BOM):
詳情請見:
http://www.onsemi.cn/pub_link/Collateral/NCP1072-D.PDF
本站內容除特別聲明的原創文章之外，轉載內容只為傳遞更多信息，并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題，請及時通過電子郵件或電話通知我們，以便迅速采取適當措施，避免給雙方造成不必要的經濟損失。聯系電話：010-82306118；郵箱：aet@chinaaet.com。