| 基于开关电容技术的锁定放大器设计 | |
| 所屬分類：技术论文 | |
| 上傳者：serena | |
| 標簽： 锁定放大器 开关电容 | |
| 所需積分：1分積分不夠怎么辦？ | |
| 文檔介紹：锁定放大是微弱信号检测的重要手段。基于相关检测理论，利用开关电容的开关实现锁定放大器中乘法器的功能，提出开关电容和积分器相结合以实现相关检测的方法，并设计出一种锁定放大器。该锁定放大器将微弱信号转化为与之相关的方波，通过后续电路得到正比于被测信号的直流电平，为后续采集处理提供方便。测量数据表明锁定放大器前级可将10-6 A的电流转换为10-1 V的电压，后级通过带通滤波器级联可将信号放大1×105倍。该方法在降低噪声的同时，可对微弱信号进行放大，线性度较高、稳定性较好。 Lock-in Amplifying（LIA）is one of important means for weak signal detection. Based on cross-correlation detection theory， switch in the swithched capacitor was used as multiplier of LIA， and a new method of correlation detection was proposed combining swithched capacitor with integrator. A kind of LIA was designed which can convert the weak signal to square-wave， then DC proportional to measured signal was obtained through follow-up conditioning circuit， providing convenience for signal acquisition and processing. The measured data shows that the electric current（10-6 A） can be changed into voltage（10-1 V） by LIA， and the signal is magnified 1×105 times by cascade band-pass filter. The noise is suppressed and the w | |
| 現(xiàn)在下載 | |
| VIP會員，AET專家下載不扣分；重復下載不扣分，本人上傳資源不扣分。 | |
Copyright ? 2005-2024 華北計算機系統(tǒng)工程研究所版權(quán)所有 京ICP備10017138號-2