Silabs公司的Si86xx系列是六路超低功耗數字隔離器,工作速率從DC到150Mbps,高達5000V VRMS絕緣,工作電壓2.5V-5.5V,通過的安全認證如 UL 1577 ,IEC 60950-1, 61010-1, 60601-1等,應用在工業自動化系統,醫療設備,混合動力汽車(HEV),絕緣開關電源,絕緣的ADC和DAC,馬達控制,電源逆變器和通信系統.本文介紹了Si86xx主要特性,通路框圖,以及Si86XXISO 評估板電路圖和材料清單.
LOW POWER SIX-CHANNEL DIGITAL ISOLATOR
Silicon Lab’s family of ultra-low-power digital isolators are CMOS devices offering substantial data rate, propagation delay, power, size, reliability, and external BOM advantages over legacy isolation technologies. The operating parameters of these products remain stable across wide temperature ranges and throughout device service life for ease of design and highly uniform performance. All device versions have Schmitt trigger inputs for high noise immunity and only require VDD bypass capacitors.
Data rates up to 150 Mbps are supported, and all devices achieve propagation delays of less than 10 ns. Ordering options include a choice of isolation ratings (3.75 and 5 kV) and a selectable fail-safe operating mode to control the default output state during power loss. All products >1 kVRMS are safety certified by UL, CSA, and VDE, and products in wide-body packages support reinforced insulation withstanding up to 5 kVRMS
Si86xx主要特性:
?
High-speed operation
?
DC to 150 Mbps
?
No start-up initialization required
?
Wide Operating Supply Voltage
?
2.5–5.5 V
?
Up to 5000 VRMS isolation
?
60-year life at rated working voltage
?
High electromagnetic immunity
?
Ultra low power (typical)
5 V Operation
?
1.6 mA per channel at 1 Mbps
?
5.5 mA per channel at 100 Mbps
2.5 V Operation
?
1.5 mA per channel at 1 Mbps
?
3.5 mA per channel at 100 Mbps
?
Schmitt trigger inputs
?
Selectable fail-safe mode
?
Default high or low output (ordering option)
?
Precise timing (typical)
??
10 ns propagation delay
??
1.5 ns pulse width distortion
?
0.5 ns channel-channel skew
?
2 ns propagation delay skew
?
5 ns minimum pulse width
?
Transient Immunity 50 kV/μs
?
AEC-Q100 qualification
?
Wide temperature range
?
–40 to 125 °C
?
RoHS-compliant packages
?
SOIC-16 wide body
??
SOIC-16 narrow body
Si86xx應用:
?
Industrial automation systems
?
Medical electronics
?
Hybrid electric vehicles
?
Isolated switch mode supplies
?
Isolated ADC, DAC
?
Motor control
?
Power inverters
?
Communication systems
通過的安全認證:
Safety Regulatory Approvals
?
UL 1577 recognized
?
Up to 5000 VRMS for 1 minute
?
CSA component notice 5A approval
??
IEC 60950-1, 61010-1, 60601-1 (reinforced insulation)
?
VDE certification conformity
?
IEC 60747-5-2(VDE0884 Part 2)
?
EN60950-1(reinforced insulation)
圖1.Si86xx簡化通路框圖
Si86XXISO 評估板
The Si86xxISO evaluation board allows designers to evaluate Silicon Lab’s family of CMOS ultra-low-power isolators. These isolators are CMOS devices employing RF coupler technology to transmit digital information across an isolation barrier. Very high speed operation at low power levels is achieved. These products are based on Silicon Laboratories’ proprietary RF isolation technology and offer shorter propagation delays, lower power consumption, improved noise immunity, smaller installed size, and more stable operation with temperature and age versus opto couplers. The Si861x/2x/3x/4x/5x/6x include up to six unidirectional isolated channels, permitting data transmission up to 150 Mbps. The Si860x isolator series consists of single-package galvanic isolation solutions for I2C, SMBus, and PMBus serial port applications.
The Si86xxISO Evaluation Kit contains the following items:
Si86xxISO based evaluation board (Si86xxISO-EVB)
?
Si8600, Si8605, Si8621, Si8655, and Si8663 CMOS digital isolators installed on the evaluation board
圖2.Si86XXISO評估板外形圖
圖3.Si86XXISO評估板電路圖(1)
圖4.Si86XXISO評估板電路圖(2)
Si86XXISO評估板材料清單:
詳情請見:
http://www.silabs.com/products/power/isolators/Pages/Si86xx-Digital-Isolators.aspx
